Engineering
Design with SolidWorks 2001, M.P. Planchard & D. S.
Planchard, SDC Publications, 2001*
SolidWorks
Essentials (2001 Plus), SolidWorks Corp., 2001**
Introduction
to Finite
Element Analysis Using I-DEAS 8, R.H. Shih, SDC Publications,
2002*
Parametric
Modeling with I-DEAS Master Series, R.H. Shih, SDC
Publications, 2001*
IDEAS Student Guide (MS 8),
SDRC, 2001*
IDEAS Tutorials
Notebook, hard copy of selected online tutorials*
Pro/Engineer
2000i, L.G. Lamit, Brooks/Cole, 2000*
Computer-Assisted Mechanical Design, J. E. Akin, Prentice Hall, 1990**
*
= Copy in ME101 for two-hour signout
**
= Copy in ME101 for photocopying (do not remove)
Help
and assignment files are found under the course web site www.owlnet.rice.edu/~mech403/index.html.
A
Mech 403 "Notebook" will be placed in MEB 102.
Copies of class handouts, transparencies, and references not
placed on the web page will be inserted and will be
available for copying.
Mech 403 assignments should be turned in at class or in the
IN BOX, located in the wall across from room ME108, by 5 pm
on the due date. Late work will lose 5% per week, but is
still required to avoid an incomplete.
Assignments marked as Re-Do must be resubmitted but the
maximum possible grade will be reduced.